The QUBIT SYSTEMS S151 Carbon Dioxide (CO2) analyzer uses state of the art non-dispersive infrared technology (NDIR) to measure CO2 levels in a flowing gas stream. The instrument is equipped with a digital display that provides a measurement of CO2 concentration in units of parts per million (ppm). In addition, an analog output signal (0 - 5 VDC) is provided to allow the device to be monitored by a chart recorder or computer at either of two levels of sensitivity. A cable is included to connect the S151 CO2 analyzer to QUBIT SYSTEMS' C101 Serial Box Interface which can be used with QUBIT SYSTEMS' C801 Data Logger software to monitor and record the CO2 concentration in the gas stream with either a PC or Macintosh computer.
|
1. On/Off and Range Switch 2. Analog output to Serial Box Interface 3. Power input 4. LCD Display of CO2 Concentration (ppm) 5. Green light lit during normal use 6. Red light flashes alternately with green light during warm-up, and when CO2 exceeds 500 ppm 7. IRGA cell cover (removable) 8. Gas inlet 9. Coarse zero control 10. Fine zero control (beneath cell cover) 11. Span control |
|
Additional instructions for IRGA
|
CO2 Analysis Lab |
CO2 Analyzer |
